Basic Info.
Temperature
Low, High Temperature
Certification
GS, ISO9001
Media
Gas, Oil, Water, Acid
Connection Mode
Flange, Welding, Sealing Face
Manufacturer Level
Top Level
Transport Package
Wooden Box
Specification
Carbon Steel, Stainless Steel
Product Description
The Introduction Production
HPS High Pressure Single Seat RegulatorHPS high pressure single seat regulator is a top guide structure of the regulator, the body fluid channel is S streamline, small pressure drop loss, large flow, wide adjustable range. The guide area of the spool guide part is large and the vibration resistance is good. Control valve with multi-spring film executive structure, compact structure, large output force.Technical Parameters And Performance
The valve body| Type | Straight through single seat cast ball valve |
| Nominal diameter | 25-80mm |
| Nominal pressure | ANSI 900, 1500, 2500; JIS 63K |
| Connection type | Flange type: FF, RJ, according to ANSI B16.5; JIS 63K
Welding type: Insert welding SW (25-80mm) butt welding BW(80mm) |
| Material | ZG25, ZGlCrl8Ni9, ZG0Crl7Nil2Mo2, 1.25Cr0.5Mo, 2.25Crl.0Mo, 5.0Cr0.5Mo SCPH21, SCPH21, SCPH61,Ti |
| Cover on the valve | Normal temperature type (P): -5 ~ +230ºC
Elongation TYPE I (El): +230 ~ +566ºC |
| Gland type | Bolt compression type |
| Packing | Asbestos braided packing |
Flow characteristics: equal percentage (%) and linear (L)
Material: lCrl8Ni9Ti, 0Crl7Nil2Mo2, Ti, 8Crl7 and stainless steel surfacing Starley alloyActuator| Type | HA multi-spring film actuator |
| Diaphragm material | Ethylene-propylene rubber with nylon |
| Spring range | 0.04 ~ 0.20, 0.08 ~ 0.24MPa |
| Supply pressure | 0.28, 0.30,0.35,0.40MPa,0.26 ~ 0.40MPa |
| Air connection | Rc 1/4 |
| Ambient temperature | -30 ~ +70ºC |
| Valve action type | Air - open or Air - off |
Return: 1%(with locator)
Linearity: ±1%(with positioner)
Adjustable range: 50:1Cv value and stroke| Nominal diameter (mm) | 25 | 40 | 50 | 80 |
| Valve seat Diameter (mm) | | 25 | 32 | 40 | 32 | 40 | 50 | 50 | 65 | 80 |
| Rated Cv value | Equal percentage linearity | JIS 63K ANSI 900 1500 | 0.25 | 0.4 | 0.63 | 1 | 1,6 | 2,5 | 4 0 | 6.3 | 12 | 12 | 17 | 25 | 17 | 25 | 47 | 47 | 75 | 110 |
| ANSI 2500 | | | | | | | | | | - | 12 | 17 | 12 | 17 | 31 | 31 | 47 | 75 |
| Rated stroke (mm) | 14.3 | 25 | 38 |
| Nominal diameter | Actuator | H | E | C | φB |
| ANSI 900 JIS 63K | ANSI | 1500 | ANSI | 2500 | ANSI | ANSI | ANSI |
| P | E1 | P | E1 | P | E1 | 900 | 1500 | 2500 |
| 25 | HA3D,R | 710 | 840 | 710 | 840 | 740 | 860 | | | | 363 | 350 |
| HA4D,R | 870 | 1000 | 870 | 1000 | 900 | 1020 | 90 | 90 | 95 | 520 | 470 |
| VA6R | 1115 | 1245 | 1115 | 1245 | 1145 | 1265 | - | 445 |
| VP5 | 895 | 1025 | 895 | 1025 | 925 | 1045 | | | | - | 345 |
| 40 | HA3D,R | 735 | 875 | 735 | 875 | 780 | 925 | | | | 363 | 350 |
| HA4D.R | 890 | 1030 | 890 | 1030 | 935 | 1080 | | | | 520 | 470 |
| VA5D | 1280 | 1420 | 1280 | 1420 | 1325 | 1470 | | | | - | 620 |
| VA5R | 1390 | 1530 | 1390 | 1530 | 1435 | 1580 | 100 | 105 | 120 | - | 620 |
| VA6R | 1140 | 1280 | 1140 | 1280 | 1185 | 1350 | | | | - | 445 |
| VP5 | 920 | 1060 | 920 | 1060 | 965 | 1110 | | | | - | 345 |
| VP6 | 1140 | 1280 | 1140 | 1280 | 1185 | 1330 | | | | - | 445 |
| 50 | HA3D,R | 765 | 925 | 765 | 925 | 800 | 960 | | | | 363 | 350 |
| HA4D,R | 925 | 1085 | 925 | 1085 | 960 | 1120 | | | | 520 | 470 |
| VA5D | 1315 | 1475 | 1315 | 1475 | 1350 | 1510 | | | | - | 620 |
| VA5R | 1425 | 1585 | 1425 | 1585 | 1460 | 1620 | 110 | 120 | 130 | - | 620 |
| VA6R | 1175 | 1335 | 1175 | 1335 | 1210 | 1370 | - | 445 |
| VP5 | 955 | 1115 | 955 | 1115 | 990 | 1150 | | | | - | 345 |
| VP6 | 1175 | 1135 | 1175 | 1135 | 1210 | 1370 | | | | - | 445 |
| VP7 | 1270 | 1420 | 1270 | 1420 | 1305 | 1465 | | | | - | 545 |
| 80 | HA3D,R | 800 | 980 | 800 | 980 | 835 | 1005 | | | | 363 | 350 |
| HA4D,R | 960 | 1140 | 960 | 1140 | 995 | 1165 | | | | 520 | 470 |
| VA5D | 1345 | 1525 | 1345 | 1525 | 1380 | 1550 | | | | - | 620 |
| VA5R | 1455 | 1635 | 1455 | 1635 | 1490 | 1660 | 140 | 150 | 165 | - | 620 |
| VA6R | 1205 | 1385 | 1205 | 1385 | 1240 | 1410 | - | 445 |
| VP5 | 985 | 1165 | 985 | 1165 | 1020 | 1190 | | | | - | 345 |
| VP6 | 1205 | 1385 | 1205 | 1385 | 1240 | 1410 | | | | - | 445 |
| | VP7 | 1295 | 1475 | 1295 | 1475 | 1330 | 1500 | | | | - | 545 |
1.P=normal temperature type, El= elongated TYPE I. E2 extended type II, E2 I= integral, E2W= welded type.
2. The size in column H on the table is the value of adjusting _ without handwheel mechanism. If there is a top handwheel mechanism, then the size of the handwheel mechanism should be added accordingly. Check the technical specifications of the HA actuator N0.AN10-29-2.Allow the differentialI valve with HA or VA actuator (with positioner)| Nominal pressure | Actuator | Air supply pressure (MPa) | Spring range (MPa) | Allowable differential pressure (MPa) |
| Seat diameter (mm) or Cv value |
| Cv≤ 4.0 | Cv≤6.3 | Cv=12 | 32 | 40 | 50 | 65 | 80 |
| ANSI 900 1500 JIS 63K |
HA3D
| 0.28 | 0.04~0.20 | 16.3 | 16.1 | 10.2 | 5 | 3.2 | 1.8 | 1 | 0.7 |
| 15.2 | 14.9 | 9.2 | 4.2 | 2.7 | 1.4 | 0.7 | 0.4 |
| 0.3 | 0.04~0.20 | 20.7 | 20.5 | 13 | 6.4 | 4.2 | 2.4 | 1.4 | 0.9 |
| 19.6 | 19.2 | 12 | 5.7 | 3.6 | 1.9 | 1 | 0.6 |
| 0.35 | 0.04~0.20 | 26.4 | 26.4 | 20 | 10 | 6.6 | 3.8 | 2.3 | 1.6 |
| 19 | 9.2 | 6 | 3.4 | 1.9 | 1.3 |
| 0.4 | 0.04~0.20 | - | - | 26.4 | 13.5 | 9.1 | 5.3 | 3.2 | 2.2 |
| 26 | 12.8 | 8.5 | 4.8 | 2.8 | 1.9 |
HA4D
| 0.28 | 0.04~0.20 | - | | 18.3 | 9.1 | 6.1 | 3.5 | 2.1 | 1.4 |
| 17.3 | 8.4 | 5.5 | 1.7 | 1.1 |
| 0.3 | 0.04~0.20 | - | - | 23.1 | 11.6 | 7.7 | 4.5 | 2.7 | 1.9 |
| 22.1 | 10.9 | 7.1 | 4 | 2.3 | 1.6 |
| 0.35 | 0.04~0.20 | - | - | 26.4 | 17.7 | 11.9 | 7 | 4.2 | 2.7 |
| 17 | 11.3 | 6.5 | 3.9 |
| 0.4 | 0.04~0.20 | - | - | - | 23.9 | 16.1 | 9.5 | 5.8 | 4.1 |
| 23.2 | 15.5 | 9 | 5.4 | 3.8 |
| VA5D | 0.26 | 0.02~0.10 | - | | - | 26.3 | 17.7 | 10.4 | 6.3 | 4.5 |
| 25.5 | 17.1 | 10 | 4.2 |
| 0.28 | 0.02~0.10 | - | - | - | 26.4 | 20 | 11.8 | 7.2 | 5.1 |
| 19.4 | 11.4 | 6.8 | 4.8 |
| ANSI 2500 |
HA3D
| 0.28 | 0.04~0.20 | 16.3 | 16.1 | 10.2 | 10.2 | 5 | 2.5 | 1.8 | 0.7 |
| 15.2 | 14.9 | 9.2 | 9.2 | 4.2 | 2 | 1.4 |
| 0.3 | 0.04~0.20 | 20.7 | 20.5 | 13 | 13 | 6.4 | 3.3 | 2.4 | 1.4 |
| 19.6 | 19.2 | 12 | 12 | 5.7 | 2.8 | 1.9 |
| 0.35 | 0.04~0.20 | 31.6 | 31.4 | 20 | 20 | 10 | 5.2 | 3.8 | 2.3 |
| 30.5 | 30.1 | 19 | 19 | 9.2 | 4.7 | 3.4 | 1.9 |
| 0.4 | 0.04~0.20 | 42.5 | 42.3 | 27 | 27 | 13.5 | 7.2 | 5.3 | 3.2 2 8 |
| 41.4 | 41 | 26 | 26 | 12.8 | 6.7 | 4.8 |
HA4D
| 0.28 | 0.01~0.20 | - | - | 18.3 | 18.3 | 9.1 | 4.8 | 3.5 | 2.1 |
| 17.3 | 17.3 | 8.4 | 4.3 | 1.7 |
| 0.3 | 0.04~0.20 | | - | 23.1 | 23.1 | 11.6 | 6.1 | 4.5 | 2.7 |
| 22.1 | 22.1 | 10.9 | 5.6 | 4 | 2.3 |
| 0.35 | 0.04~0.20 | - | . | 35.1 | 35.1 | 17.7 | 9.5 | 7 | 4.2 |
| 34.1 | 34.1 | 17 | 8.9 | 6.5 | 3.9 |
| 0.4 | 0.04~0.20 | | - | 44 | 44 | 23.9 | 12.8 | 9.5 | 5.8 |
| 23.2 | 12.3 | 9 | 5.4 |
VA5D | 0.26 | 0.02~0.10 | | | | - | 26.3 | 14.1 | 10.4 | 6.3 |
| 25.5 | 13.6 | 10 |
| 0.28 | 0.02~0.10 | | - | - | - | 29.6 | 15.9 | 11.8 | 7.2 |
| 28.9 | 15.4 | 11.4 | 6.8 |
HSC Sleeve Single Seat Regulator
HSC sleeve single seat control valve is suitable for the high pressure difference is easy to produce flash cavitation occasions, is a high-performance single seat control valve, the solid sleeve to protect the valve body from flash and cavitation damage.HSC sleeve control valve has the following advantages:1. The valve has a compact structure, S streamline channel, so that its pressure drop loss is small, large flow, wide adjustable range.
2. Large spool guide area and good vibration resistance.
3. The leakage of the regulator conforms to ANSI B16.104.
4. Equipped with multi-spring film or cylinder actuator, compact structure, large output force. This product conforms to GB/T4213-92 standard.Body parameters| The body form | Straight through sleeve single seat cast ball valve |
| Nominal diameter | 40, 50, 65, 80, 100, 150, 200mm |
| Nominal pressure | ANSI 125, 150, 300, 600; JIS 10, 16, 20, 30, 40K; PN1.6, 4.0, 6.4MPa |
| Connection type | Sealing face type | FF, RF, RJ, LG, MFM |
| The standard of the flange | JIS B220, JB/T79, ANSI B16.5-1981, GB/T9113, HG205997, HG20618-97 |
| The welding standard | Welding embedded SW (40 ~ 50 mm); Butt welding BW (65 ~ 200 mm) |
| Material | Cast steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, SCS16) titanium, etc |
| Bonnet | The normal temperature type | -17ºC+230ºC |
| Elongation type I | -45~17ºC, +230~+566ºC |
| Elongation type II | -100~-45ºC |
| Elongation type III | -196~-100ºC |
| Gland type | Bolt compression type |
| packing | V - type PTFE packing, PTFE impregnated asbestos packing, Titanium and corrosion resistant alloys, etc |
| The valve core type | Sleeve single seat plunger type spool |
| Sleeve form | Split sleeve |
| Flow characteristic | Equal percentage characteristic (%) and linear characteristic (L) |
| Material | Stainless steel, stainless steel surfacing starley alloy, titanium and corrosion resistant alloy, etc |
| Leakage | Metal seated | Less than 0.01% of valve capacity rating, according to ANSI B16.104-1976 Class IV |
| Back to the poor | With the locator | Less than 1% of total travel |
| No locator | Less than 3% of total travel |
| The basic error | With the locator | Less than ±1% of total travel |
| No locator | Less than ±5% of total travel |
| - | Note: Standard V - type PTFE packing is used |
| The adjustable range | 50:1 |
| Nominal diameter | 40 | 50 | 65 | 80 | 100 | 150 | 200 |
| The seat diameter | Cv=4.0 | Cv=6.3 | 25 | Cv=6.3 | 25 | 32 | 25 | 32 | 40 | 32 | 40 | 50 | 40 | 50 | 65 | 65 | 80 | 100 | 80 | 100 | 125 |
| Rated CV value | 4.0 | 6.3 | 12 | 6.3 | 12 | 21 | 12 | 21 | 30 | 21 | 30 | 50 | 30 | 50 | 85 | 85 | 125 | 200 | 125 | 200 | 310 |
| Rated stroke | 35 | 38 | 50 | 75 |
| Nominal diameter DN(mm) | 40, 50, 65, 80, 100, 150, 200mm |
| Structure length | Because each standard connection size is not the same, if you need detailed connection size and technical documents, please contact the company's technical department or sales department, technical personnel will provide you with complete drawings and technical data. |
| The body height |
| Rated stroke |
Junkang Fluid Technology Co., LTD
Professional Control Valve Manufacturer
Company ProfileJunkang Fluid Technology Co., Ltd. is an expert manufacturer of regulating valves and pressure relief valves. The company is located in the "township of pumps and valves in China" - Dongou Industrial Zone. It is 30 kilometers away from Wenzhou LongWan International Airport, 12 kilometers away from Wenzhou South Station and 10 kilometers away from Yongjia Station.
The company has strong technical force, with a number of sets of advanced production equipment and testing equipment. The technical team has rich product experience. The company has large-scale production. Products with reasonable design, beautiful appearance, stable quality and other characteristics, are widely used in power plants, iron and steel plants, oil extraction, refining and chemical industry, paper making, metallurgy, medicine, construction and other fields, long-term trust and praise by new and old users.
Junkang Valve has always been market-oriented, strict quality control, to ensure that the interests of users are effectively guaranteed. The company adheres to the "high quality as the main line, excellence as the goal", adheres to the "business integrity, quality innovation" business philosophy, and in the fierce market competition to establish a mutually beneficial sales network, highlighting the unique advantages of Junkang Valve.
Production EquipmentTechnology CenterCertificateAfter- Sale Service can be Provided ADD: Dongou Industial Area, Oubei Town, Yongjia County, Wenzhou City, Zhejiang, China
https://pneumaticvalve.en.made-in-china.com/FAQ1.What's Your Strong Products?The control valve series are our strong products.
2.If The Factory Has The Control Valve In Stock?There are no control valve in stock at anytime, because this kinds of products are made by client's requirements.
3.Can I request to advance the shipment?
It should be depends on whether there is sufficient inventory in our warehouse.
4.Can I request to change the form of packaging and transportation?
Yes, we can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.
The End
Address:
Liandu District, Lishui, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Chemicals, Health & Medicine, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 9000, QC 080000, ISO 29001
Company Introduction:
Zhejiang Junkang Valve Technology Co., Ltd. is an expert manufacturer of regulating valves and pressure relief valves. The company is located in the "township of pumps and valves in China" - Oubei Sanqiao Industrial Zone. It is 30 kilometers away from Wenzhou Yongqiang International Airport, 12 kilometers away from Wenzhou South Station and 10 kilometers away from Yongjia Station.
In 2011, founded Junkang Fluid Technology Co., Ltd., the company has strong technical force, with a number of sets of advanced production equipment and testing equipment. The company currently has more than 30 employees, including 5 core technical personnel. The technical team has rich product experience. The company has large-scale production. There are mainly four type products: Self-Operated Control Valve, Linear Control Valve, Ball Valve and Butterfly Valve
The company specializes in the production and sales of automatic control valves, pipeline pressure control, flow control, temperature control, regulating valves and other products, These Products with reasonable design, beautiful appearance, stable quality and other characteristics, are widely used in power plants, iron and steel plants, oil extraction, refining and chemical industry, paper making, metallurgy, medicine, construction and other fields, long-term trust and praise by new and old users.
Junkang Valve has always been market-oriented, strict quality control, to ensure that the interests of users are effectively guaranteed. The company adheres to the "high quality as the main line, excellence as the goal", adheres to the "business integrity, quality innovation" business philosophy, and in the fierce market competition to establish a mutually beneficial sales network, highlighting the unique advantages of Junkang.
We cherish the JUNKANG brand which has been forged with sweat for many years, and cherish every hard-won honor. We will continue to work harder, innovate continuously and be pragmatic. Junkang continuously creates employment opportunities for the society, pays taxes honestly, and actively promotes the civilization and progress of society. We will use standard management enterprises, brand products to create markets and sincerely serve customers.
Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with an irresistible force.
We sincerely welcome customer from all walks of life to negotiate, inspect and guide us. We are willing to join hands with you and compose a song of triumph on the road to success.
Wants More information can Contacts us:
ADD: Dongou Industial Area, Oubei Town, Yongjia County, Wenzhou City, Zhejiang, China
){kind=link}